Rack and Pinion Steering Conversion
Manual or Power

 
 

Mustang / Cougar / Falcon / Ranchero

 
 
 
Patented line of high performance center-take-off rack and pinions enables correct geometry and a level of positive, direct steering that is not possible with adapted OEM units. Both manual and power versions feature quick ratio, straightcut gears, requiring only three turns lock-to-lock (standard OEM 4-5/8 turns, Performance OEM 3-3/4 turns). The unique modular design utilizes an assortment of mounting brackets and centerlinks to adapt to various classic Ford/Mercury vehicles including Mustangs, Cougars, Falcons, Comets and Rancheros.

Existing factory mounting locations are used whenever possible to simplify rack installation. Once installed, the rack becomes a rigid crossmember bracing the lower control arm mounts; an improvement over the original bent tubular design. Mounting brackets along with the centerlink are specific to engine type and are used to vary the height of the rack as needed for oil pan clearance.

NOTE: Installation of rack-and-pinion system on '60-65 Falcons and '64-66 Mustangs requires V8 spindles and tie-rod assemblies.


 
Small Block Power Rack:
AWI RCKP-02 - Mustang/Cougar
AWI RCKP-03 - Falcon/Comet (add'l $100)
 


 
Small Block Manual Rack:
AWI RCKM-02 - Mustang/Cougar
AWI RCKM-03 - Falcon/Comet (add'l $100)
 

Manual Rack with Installation Kit
Price: $1398.00 and up

Power Rack with Installation Kit
Price: $2098.00 and up
 

Model Year
Comet 1960-1965
Cougar 1967-1970
Falcon 1960-1965
Mustang 1964-1970
Ranchero 1960-1965

 

Download
Technical Data Sheet (1.2MB - PDF)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ORDER & CONTACT INFORMATION



Prices and Availability subject to change without notice.
 

HOME                            LEGAL NOTICE                        RETURN POLICY                        SITE MAP                              SPONSORS                           CONTACT                       619.401.6900

2005-2014 Autoworks International, All Rights Reserved.