Dynacorn 1967 Fastback Mustang Body
- Revolutionary Replacement

For a long time, we've heard rumors about a new classic-Mustang body coming from Dynacorn Classic Bodies. Based in Oxnard, California, Dynacorn has over 20 years of manufacturing experience and is already famous for its '67 and '69 replacement Camaro-body offerings. Now Ford has issued its blessing, and the rumors have become fact as Dynacorn introduces its '67 Mustang Replacement Restoration Body Shell, PN MS67FB. This body is a beautiful replication of the original '67 Mustang fastback and a fitting tribute to that Ford-designed masterpiece.

        

Besides being a faithful copy of the original car, many significant improvements have been incorporated into the new body. Forty years of service has shown where reinforcement might best be applied to the original Mustang body, and Dynacorn has made these changes. Dynacorn engineers also elected to construct the new body with thicker-than-stock steel in many crucial areas, such as the floorpan, firewall, quarter-panels, and roof. Other improvements were based on parts designed by Ford but not employed specifically on the '67 Mustang fastback. For example, the new body has the seat pan of a '67 convertible and the shock towers of a '69 big-block car.

Dynacorn has taken all of the best ideas and incorporated them into one body shell. Combined, these structural improvements bolster the original design, paying off in improved strength and rigidity. For racers or cars with big engines, this structural enhancement is especially desirable. The body retails for $15,500, which includes the trunk lid and door shells, plus a $495 crate fee. The buyer pays shipping.

Autoworks International in El Cajon, California, is an up-and-coming leader in the high-performance classic-Ford world. That's why Dynacorn chose this company to receive one of the first Mustang replacement restoration bodies for this story. The Speed Channel television show Chop Cut Rebuild has also chosen Autoworks for the on-site production of its program, which will detail the buildup of the Autoworks/Dynacorn car.

This is what the new Dynacorn Mustang body looks like when it arrives. The body is bolted down solidly in the center of the steel-frame cage. There are provisions for a forklift on three sides.	Here's a front shot of the replacement restoration body shell, free of the cage and up on dollies so that the project can be wheeled around. It's strange to see a '67 Mustang body shell in such a pristine condition.	This tag is displayed prominently on the new delivery to remind the recipient of the product's Blue Oval heritage. We loudly applaud Ford for allowing the Dynacorn project to go forward. Certainly the '67 Mustang fastback is a milepost in Ford history that is worthy of immortality.
Here's a typical example of what you might find from a classified ad. Any vintage-Mustang fastback in one piece is worth preservation, but this car may need $15,000 of repair and paint work just to catch up to the new body. We'll use this original '67 Mustang for comparison.	The original '67 fastback floorpan looks like this. Each seat has its own separate pan mounted to the floor. This individual seat-pan arrangement is fine for mounting seats but does little to enhance floorpan rigidity.	On the Dynacorn body, it's easy to see the seat pan is different than the stock-bodied car. This part is a single platform spanning the width of the floor, with the heavy ribbing over the driveline hump adding to the strength of the chassis. Ford used this seat pan only in the Mustang convertible and not on the enclosed versions of the car. This robust component contributes greatly to the overall chassis rigidity.