Make your Mustang/Falcon run mega cool with our all aluminum Mega Cool III
Radiator Kit. This kit is now the 3rd generation,
each time improving the mounting and performance of this
radiator. We use proprietary bracket system, which allows
you to adjust the radiator fore and aft as well as up and
down for alignment.
The cross flow design is far superior to the traditional
down flow radiators and other aftermarket radiators found in
stock Mustangs. This kit was designed to clear the
troublesome Ford water pump that prohibits many electric fan
applications. Our fiberglass enclosed radiator shroud allows
for channeled air cooling. Two 10" electric fans pull over
2400 cfm over the entire radiator core because of the fan
shroud design.
These duel fans have been tested to pull very low amperage.
Less than 12 amps on startup, for two fans combined. With
the duel fans running they only pull around 7 amps
continuous. This feature is very important as most fans will
take more than double the amperage to run. Their quiet and
smooth operation is a plus!Installation is quick and easy. Unlike other radiator
kits, our kit is designed for your car and then made for
easy instillation with adjustability like no other kit on
the market.
Mega cool kits have a custom fabricated look and bolt in after drilling
a couple of holes, you will have to trim off the original
radiator mounting brackets in the radiator core support to
allow for the additional air flow needed for this kit. Our
precision slotted flanges are welded to the lower tanks
allowing the radiator to sit flush on your frame rails with
simple adjustments to fit your car.
Our 26” radiator kits sometimes require the battery tray to be
trimmed or removed from its stock location. A smaller
battery may also be used when trimmed. Battery relocation
kits are available at discounted price when purchased with
our 26" Mega Cool III Radiator Kit.
We have driven and tested this radiator kit in just about
every engine combination. Whether it be a stock or modified stroker
engine, it has kept the engine “MEGA COOL”.
|
|
 |
Optional overflow tanks, battery
relocation
kits, and transmission coolers are
available upon request for additional cost. |
Overall size: 26”x19”x3” Core Size:
22-3/8”x18-3/4”x2-1/4” Dual 1” tubes
Price:
$749.95
Introductory price: $699.95 (Mustang)
plus S&H
Shipping is $49.95 (oversized box) to most states not
including Alaska and Hawaii.
Available options:
*Cooling Fan Relay and Sender Kit.
$69.95 we will weld the bung in the radiator
for free with this upgrade, you install and wire yourself.
*We will install and wire the kit for you for a Mega deal
of $35.00
*Please specify your hose outlet location
upon ordering. i.e Lower driver side/upper passenger side.
*Radiator not designed for cars with auto
trans, external trans cooler
must be used*
*Temperature sending bung 3/8" pipe thread is an option and
can be welded in for easy installation of fan
switch. Add $25.00 if you are not purchasing the
Cooling Fan Relay and Sender Kit above.
(Click on image to enlarge)
Here are how the fans and shroud
look before and after the Cooling Fan Relay
and Sender Kit installation. Easy 3 wire hookup, red to
battery blue to ground and brown to switched 12volt or
ignition.
Price:
$799.95
Introductory price: $749.95
(Falcon/Ranchero) plus S&H
Shipping is $49.95 (oversized box) to most states not
including Alaska and Hawaii.
Available options:
*Cooling Fan Relay and Sender Kit.
$69.95 we will weld the bung in the radiator
for free with this upgrade, you install and wire yourself.
*We will install and wire the kit for you for a Mega deal
of $35.00
See pictures above.
Falcon/Ranchero may also fit other models
with a inside to inside frame rail measurement of 26 1/8"
*Please specify your hose outlet location
upon ordering. i.e Lower driver side/upper passenger side.
*Radiator not designed for cars with auto
trans, external trans cooler
must be used*
*Temperature sending bung 3/8" pipe thread is an option and
can be welded in for easy installation of fan
switch. Add $25.00 if you are not purchasing the
Cooling Fan Relay and Sender Kit above.
This product is unique to
Autoworks Parts and you won't find it anywhere else.
|
