4.6 wiring Harness
 
 
  
 

For Ford 4.6 V-8 Modular Engines

  
 
 
This engine was introduced in 1993 in the Mark VIII. This is Ford Motor Company's new modular design engine which can utilize some of the same parts to create a lower horsepower engine used in other Ford models. The 4.6 engine in the Mark VIII utilizes a thirty two valve, double over head cam design to create 280 horsepower while the 4.6 in other Ford models is a single overhead cam engine that produces 205 horsepower. The Mark VIII engine has intake manifold runner control solenoids which operate plates which are closed below 3000 RPM so the engine is running on two valves per cylinder. With no air delivered to the secondary intake valves, economy and emissions are improved at low RPM. Above 3000 the plates open increasing air delivered to each cylinder for more power on demand. The 4.6 engine has two ignition coils with each coil firing four cylinders. The 4R70W transmission is used behind this engine.
 
Ford 4.6 1991-1992 Town Car, 1992 LTD/Crown Vic Harness

FT-92

$695.00
Ford 4.6 1993 Town Car, LTD/Crown Vic Harness FT-93 $795.00
Ford 4.6 1994-1995 Town Car, LTD/Crown Vic Harness FT-95 $895.00
Ford 4.6 1993-1995 Mark VIII Harness MK-93 $975.00
Ford 4.6 1996 Mark VIII Harness MK-93A $995.00
1996-1998 Mustang 4.6 2V Harness MG-91 $895.00
1996-1998 Mustang Cobra 4.6 4V Harness MG-91A $895.00
Ford Truck/Bronco 1993-1994 5.0 / 5.8 / 7.5 Harness ML-93 $895.00
Ford Truck/Bronco 1995 - 5.0 / 5.8 / 7.5 Harness ML-95 $895.00
Ford Truck 4.6 Harness MG-91T $895.00

ORDER & CONTACT INFORMATION



Prices and Availability subject to change without notice.

HOME                            LEGAL NOTICE                        RETURN POLICY                        SITE MAP                              SPONSORS                           CONTACT                       619.401.6900

©2005-2008 Autoworks International, All Rights Reserved.